Fault Finding & Troubleshooting
Rapid, systematic diagnosis of electrical, mechanical and control faults on BCF lines.
Oerlikon Neumag Freelance Expert
End-to-End Technical Solutions for BCF Machinery
Fault finding, overhaul, machine relocation and Siemens automation — every machine delivered running, ready for production.
Oerlikon Neumag Expertise
Siemens Automation
24/7 On-Site Support
15+
Years of Field Experience
100+
Projects Completed
7/24
Emergency Response
50+
BCF Machines Serviced
About Me
Freelance Engineer & Siemens Automation Specialist
As a freelance engineer working with Oerlikon Neumag, I provide full-scope technical support for BCF (Bulked Continuous Filament) machines used in carpet yarn production. From fault finding to full overhauls, from machine relocation to commissioning, I handle every stage — and deliver every machine running.
I hold startup authorization for Neumag equipment, and as a Siemens automation specialist I work on PLCs, motor drives and HMIs — backed by serious, hands-on fault-finding experience.
- Oerlikon Neumag BCF machinery expertise
- Siemens PLC, drive and HMI services
- Commissioning and startup authorization
- Delivered running, ready for production
Vehbi K.
Founder, Veri İzi Teknoloji
Services
What I Do for BCF Lines
Complete technical coverage — from a single breakdown to a full line move.
Overhaul & Maintenance
Planned overhauls, component renewal and preventive maintenance programs.
Machine Relocation
Dismantling, transport, reinstallation and full commissioning — handed over running.
Commissioning & Startup
Startup authorization for Neumag equipment with documented performance tests.
PLC Programming
Siemens S7-1200 / S7-1500, TIA Portal engineering and logic optimization.
Motor Drives
Sinamics configuration, parameterization and drive optimization for precise control.
HMI & Visualization
WinCC panels, process screens, alarms and operator interfaces built to fit your line.
Training & Consulting
Operator and maintenance training plus technical consulting on site or remote.
Expertise
Siemens Automation Ecosystem
Deep, hands-on experience across the Siemens automation stack for production lines.
PLC & Control
Troubleshooting, revision, and upgrades for S5, M7-300, S7-200, S7-300, S7-400, S7-1200, and S7-1500 PLCs using "S5 for DOS," "Simatic Manager," and "TIA Portal V10.5-V2x."
Motor Drives
Parameterization, optimization, troubleshooting, and upgrades for MM2, MM3, MM4, G110, G120, S110, S120, and S210 models.
HMI & Visualization
TD200, WinCC Flexible 2005-2008, Prosave, WinCC TIA Portal, WinCC V5x, 6x, 7x design, software recovery, upgrade
TIA Portal
S7-1200
S7-1500
Sinamics G120
Sinamics S120
WinCC
HMI Panels
PROFINET
ET200
Safety
How It Works
A Clear, Proven Process
01
Discovery & Analysis
On-site inspection, fault analysis and a precise scope of work.
02
Planning & Preparation
Detailed planning; spare parts and resources organized in advance.
03
On-Site Execution
Careful implementation with minimal production downtime.
04
Commissioning & Handover
Tests, documentation and delivery running at full capacity.
In the Field
Real Machines, Real Work
Why Veri İzi
Trusted at Every Step
Oerlikon Neumag Expertise
Deep knowledge of Neumag BCF lines and systems.
Running Handover
Every machine is delivered running, ready for production.
24/7 Emergency Support
Rapid response to keep your line running around the clock.
Startup Authority
Authorized commissioning with documented results.
Testimonials
What Plant Managers Say
Our line was down for days. Vehbi diagnosed the fault quickly and had us back in production the same evening. Professional from start to finish.
He handled the complete relocation of our BCF line — from dismantling to commissioning. The machine was delivered running with zero surprises.
His Siemens automation work is outstanding. PLC, drives and HMI were modernized with minimal downtime and excellent documentation.
FAQ
Frequently Asked Questions
Which BCF machines do you service?
I work on Oerlikon Neumag BCF lines — extrusion, spinning, texturizing and winding sections — for carpet yarn production, as well as their drives and control systems.
How does the machine relocation process work?
Full dismantling, safe transport, reinstallation and commissioning. The machine is tested and handed over running, ready for production.
Do you offer 24/7 emergency support?
Yes. Line stoppages are costly — I provide fast on-site and remote support to get you back into production as quickly as possible.
What Siemens automation services do you provide?
PLC programming (S7-1200 / S7-1500, TIA Portal), motor drive configuration (Sinamics), HMI / WinCC engineering and comprehensive fault finding.
Which regions do you serve?
I provide on-site service across Turkey and abroad for BCF and automation projects.
Contact
Let's Get Your Line Running
Tell me about your machine, your fault or your project — I'll get back to you quickly.